TEL 5-2423

DC/DC Converter • • • • • • • • • • TEL 5 Series, 5 Watt Wide 2:1 input range Cost efficient design High power density High efficiency up to 86% Built-in EN 55032 class A filter I/O isolation 1’500 VDC Regulated outputs Continuous short-circuit protection High reliability, MTBF >1 Mio. h 3-year product warranty UL 60950-1 IEC 60950-1 The TEL 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and excellent cost / performance ratio. High efficiency allows an operating temperature range of –40°C to +85°C at full load. This product series provides an economical solution for many cost critical applications in industrial and consumer electronics. Models Order Code Input Voltage Range TEL 5-1210 TEL 5-1211 TEL 5-1212 TEL 5-1222 TEL 5-1223 TEL 5-2410 TEL 5-2411 TEL 5-2412 TEL 5-2422 TEL 5-2423 www.tracopower.com 9 - 18 VDC (12 VDC nom.) 18 - 36 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC +12 VDC +15 VDC 1'200 mA 1'000 mA 500 mA 250 mA 200 mA 1'200 mA 1'000 mA 500 mA 250 mA 200 mA November 30, 2022 Vnom Efficiency Imax –12 VDC –15 VDC 250 mA 200 mA –12 VDC –15 VDC 250 mA 200 mA typ. 77 % 81 % 84 % 84 % 84 % 79 % 83 % 86 % 86 % 86 % Page 1 / 4 TEL 5 Series, 5 Watt Input Specifications Input Current 12 Vin models: 20 mA typ. 24 Vin models: 5 mA typ. 12 Vin models: 429 mA typ. (3.3 Vout model) 514 mA typ. (5 Vout model) 595 mA typ. (12 Vout model) 595 mA typ. (12 / -12 Vout model) 595 mA typ. (15 / -15 Vout model) 24 Vin models: 209 mA typ. (3.3 Vout model) 251 mA typ. (5 Vout model) 291 mA typ. (12 Vout model) 291 mA typ. (12 / -12 Vout model) 291 mA typ. (15 / -15 Vout model) 12 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 12 Vin models: 4.5 VDC min. / 6 VDC typ. / 8 VDC max. 24 Vin models: 8 VDC min. / 12 VDC typ. / 16 VDC max. 12 Vin models: 8 VDC max. 24 Vin models: 16 VDC max. 12 Vin models: 25 mA typ. 24 Vin models: 15 mA typ. 12 Vin models: 1'250 mA (slow blow) 24 Vin models: 1'250 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type 3 W max. - At no load - At full load Surge Voltage Start-up Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter Short Circuit Input Power Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (20 - 100%) Ripple and Noise - Voltage Balance (symmetrical load) - 20 MHz Bandwidth Capacitive Load - single output - dual output ±1% max. 0.3% max. 0.3% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Overload Protection Output Current Limitation 50 mVp-p typ. 75 mVp-p max. (To further reduce Ripple and Noise, a capacitor with 3.3 μF X7R is recommended.) 6'800 µF max. 6'800 µF max. 6'800 µF max. 1'000 / 1'000 µF max. 1'000 / 1'000 µF max. 5 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 37 ms max. Continuous, Automatic recovery Foldback Mode 120% min. of Iout max. 150% typ. of Iout max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 4 TEL 5 Series, 5 Watt Transient Response 6% max. (25% Load Step) 150 µs typ. / 300 µs max. (25% Load Step) - Response Deviation - Response Time Safety Specifications Safety Standards - IT / Multimedia Equipment - Certification Documents Pollution Degree CSA-C22.2, No. 60950-1 Designed for EN 62368-1 (no certification) EN 60950-1 IEC 60950-1 UL 60950-1 www.tracopower.com/overview/tel5 PD 2 EMC Specifications EMI Emissions EN 55032 class A (internal filter) EN 55032 class A (internal filter) - Conducted Emissions - Radiated Emissions General Specifications Relative Humidity Temperature Ranges Weight 95% max. (non condensing) –40°C to +85°C +90°C max. –50°C to +125°C 3.33 %/K above 70°C See application note: www.tracopower.com/overview/tel5 Natural convection (20 LFM) 200 kHz min. (PFM) 300 kHz typ. (PFM) Functional Insulation 120 VAC 1'500 VDC - Input to Output, 60 s 1'800 VDC - Input to Output, 1 s 1'000 MΩ min. - Input to Output, 500 VDC 380 pF typ. - Input to Output, 100 kHz, 1 V 500 pF max. - Calculated MTBF 1'000'000 h (MIL-HDBK-217F, ground benign) Allowed (hermetical product) See Cleaning Guideline: www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Non-conductive Plastic (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Phosphor Bronze (C5191) Nickel (2 - 4 µm) Gold (75 - 125 nm), glossy Plastic Case PCB Mount THD (Through-Hole Device) DIP24 Wave Soldering 260°C / 10 s max. 16.9 g Thermal Impedance - Case to Ambient Power Derating Cooling System Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile - Operating Temperature - Case Temperature - Storage Temperature - High Temperature 15.34 K/W typ. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 3 / 4 TEL 5 Series, 5 Watt Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) - RoHS Declaration Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tel5 Outline Dimensions Pinout 2 3 11 9 Pin Single Bottom view 20.3 (0.80) 15.22 (0.60) 2 –Vin (GND) 3 –Vin (GND) 9 No Pin Common 11 NC –Vout 14 23 2.54 22 16 15.24 (0.60) (0.10) 16 14 5.08 4.5 (0.20) (0.18) Dual +Vout –Vout Common 22 +Vin (VCC) 23 +Vin (VCC) NC: Not connected 10.2 (0.40) 4.1 (0.16) 31.8 (1.25) Dimensions in mm (inch) Pin diameter: 0.5 ±0.05 (0.02 ±0.002) Tolerance: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) © Copyright 2022 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 30, 2022 Page 4 / 4